A garage door cycles a thousand times a year. It should whisper, balance and never make you think about springs. Overhead & Iron checks balance and tracks before selling anything, replaces springs in matched pairs, and FILL: hero-preisversprechen (nur Belegtes).
Door stuck? Spring snapped? Same-day repair, call now · FILL-servicecall-claim
★★★★★"Balanced it, kept the opener, saved me $400."
Kevin L. · via Google
From a single spring to a full new door, we install, tune and repair, all under one roof. Every service below carries the same quality promise.
Four parts do most of the failing. Here is what each one usually needs, so a quote never surprises you.
The usual suspect.
On a two-spring door, replacing both usually saves the second call-out, the reason belongs in the quote, not on the invoice.
Dents happen.
A new panel in a sun-faded door will read slightly newer. We say that before, not after.
The quiet worker.
A new motor doesn’t fix a heavy door. Balance first, opener second, anyone who skips that order sells you the same problem twice.
Sometimes it’s time.
New garage doors rank among the best resale returns of any home project. Still, if yours has five good years left, we’ll say so.
Not sure which yours is? Describe the sound it makes, we can usually tell you over the phone what you’re looking at.
No hourly meter, no surprise line items, no “while we’re at it”. You approve one clear quote before a single bolt turns, so you know the cost up front.
We visit, measure every surface and listen to what you actually want. Free, and it stays free.
Door, parts, labor and haul-away, one line, one price. Approved by you before anything starts.
The number lands in writing with a one-year workmanship warranty. If it isn’t right, we make it right.
No mystery math. Four things decide what garage door work costs, and we walk every one with you before the quote lands.
Whatever the mix, you get one clear quote, in writing, before any work starts.
From a carriage-style upgrade that resets the whole facade to a 6am spring rescue, this is the work we tune, balance and warranty across Portland every day.
Springs balanced, rollers renewed, tracks aligned. A door this smooth disappears from your day, which is the point.
Book your free door checkDoing it the honest way: thorough prep, premium work, a fair price, and a crew who treats your home like their own.
Meet the companyYou approve the exact price before we start. No hourly meter, no surprise line items at the end.
One number · in writingWe start when we say, protect your floors and furniture, and leave the site spotless every evening.
Spotless every eveningYou approve the exact number in writing before any work starts, honest and up front.
It doesn’t moveEvery project is backed by a written one-year workmanship warranty. If it's not right, we make it right.
Written warrantyA written workmanship warranty on every project. If a finish isn't right, we come back and make it right, no fine print, no runaround.
The quote you approve is the price you pay. No deposit games, no hourly meter, no surprise line items at the end, just the number we shook on, in writing.
No rotating subcontractors. Crews who show up on time, protect your home, and treat every surface like their own.
The same person who walks your home and quotes the job is on the ladder start to finish, no handoffs to a sub you never met.
When your site goes live, your crew's real names and photos replace these — we never use stock people.
Three jobs from the past few months, what they were, where, and how long they actually took.
Both torsion springs snapped on a 16-foot door. Swapped in a matched high-cycle pair, re-set the winding, checked cable tension and balanced the door so it holds halfway on its own.
Old single-panel steel out, insulated carriage-style door in. Re-shimmed the tracks square, hung new rollers and hardware, and tuned the opener travel limits so it seats soft and reverses on the safety beam.
Door jumped the track after a car nudge and jammed shut at 6am. Freed the panels, straightened a bent track section, reseated the rollers and cables, and cycled it a dozen times to confirm it rides quiet again.
An annual walkthrough, free touch-up visits, priority scheduling for your next project, and members-only pricing, for less than a coffee a week.
See what’s included"Spring snapped at 6:10am with my car inside, they had me rolling by 8:30 with a matched pair wound and the whole door balanced. Flat price named on the phone, held on the invoice."
"New carriage-style door and the front of the house looks renovated. Hung square, balanced to a fingertip, and the opener is so quiet we check if it actually closed."
"The grinding that woke the baby turned out to be dry steel rollers. Sealed nylon swap and real lube, the door hums now. Twenty minutes, honest money."
"They talked me OUT of a new opener, my door was unbalanced and murdering the motor. Balanced it, kept the opener, saved me $400. That shop has my key code forever."
"Basketball dent in one panel, matched and swapped in an afternoon, you cannot tell which section is new. The other quote was a whole door."
"The door studio on their site is how we picked cedar-look, tapped through and the whole page warmed up. The real door matches the preview."
A lot of our work comes from a neighbor who watched us work the house next door. If you're in the metro, we're just around the corner.
Nine wet months a year work on every spring and track around here — rust is the local door-killer, which is why lube-and-inspect visits catch most failures before the bang.
Free estimates · never a franchise
Find your cityNo mystery in the middle. This is the path the job actually takes, start to finish.
You call and talk to a real person, not a dispatcher script. We ask what the door is doing, how old it is, and set a time for a real tech to come look, usually the same week.
A tech measures the opening, checks the spring cycles, tracks, cables and opener, and looks at how the door sits in the frame. We tell you what's worn and what can wait, no upsell on parts that still have life.
You get a clear quote by email with the door model, spring size, opener and labor broken out line by line. The quote we give you is clear up front.
Our own crew shows up in the booked window, hangs the door square and balances it to a fingertip, sets the spring pairs matched and cycles the opener with the safety reverse. Most single doors are done in a day.
We run the door with you, show you the manual release and the reverse test, and sweep up every panel scrap and old cable. You get the written warranty on parts and labor in your hand before the truck pulls away.
Three fields, no account, no pressure. We call back the same business day with a real number.
Including us. This trade has more bait-pricing than any other that visits your driveway. Five questions on the phone sort it out before anyone rings your bell.
Part, labor and trip, one number or an honest range, on the phone. Whoever won’t say until they’re “on site” plans to sell you there.
10,000-cycle and 25,000-cycle springs are different parts at different prices. “Lifetime spring” without a number is marketing, not a spec.
On a two-spring door there’s a fair case for both, same age, same wear. The right answer is an explanation, not a scare story.
The door must reverse on contact, that’s what protects kids, pets and bumpers. It takes two minutes and belongs in every visit.
Lead sites without a local address dispatch whoever bought the call. A company with an address here is still here when the warranty matters.
Bring this list to the call. We’ll answer all five before you ask.
Book a free estimate in under a minute, or call and talk to a real person right now. Upfront pricing, expert crews, no pressure.
Faster: text us a photo of the door and we reply with a ballpark, usually same day.
or call (503) 555-0188